LTLC9350
Leimac IDMU-P4B-12
Expandable Light Controller Base, 4 Channels, 12V
Not available for purchase outside of US & Canada.Please contact us for a quote.
The Leimac IDMU-P4B-12 light controller has four independent PWM outputs operating at 12 VDC.
The Leimac IDMU light controllers feature an expandable design for ultimate flexibility. This PWM dimming controller will precisely coordinate both lights and output signals based on input trigger events. The output signals can be used to trigger cameras. Connect up to four expansion controllers to a base controller to coordinate up to 40 independent lights.
The Ethernet interface on base controllers support TCP/IP and UDP/IP protocols for communication with PLCs, computers, and many robots. It also supports the GigE Vision and Genicam standards, which enables simplified configuration using popular PC vision systems.
Up to five modules may be added to a base controller to provide additional control interfaces, such as manual intensity adjustment and parallel inputs.
Loading...
Electrical
| Output Channels: | 4 |
| Control Interfaces: | Manual |
| Control Method: | PWM |
| Input Voltage: | 24 VDC ± 5% |
| Input Current: | 3.5 A or less |
| Electrical Inputs: | 5 Inputs: 5 to 24 VDC, NPN or PNP |
| Electrical Outputs: | 5 Outputs: 120 mW max. @ 5 to 24 VDC, sinking or sourcing |
| Light Output Voltage: | 12 VDC |
| Light Output Power: | 72 W total (36 W per channel pair) |
| PWM Frequency: | ~125kHz (1000 levels) |
| Intensity Range: | 0 - 100% PWM duty cycle |
| External On/Off Response: | 3.3 μs (trigger activation: RisingEdge); 3.0 μs (trigger activation: FallingEdge) |
| Trigger Output Response: | 1.0 μs or less |
| Status Output Response: | 50 μs or less |
| Output Delay Adjustment: | 0 to 9000 μs (in units of 1 μs) |
| Output Duration Adjustment: | 100 to 999,900 μs (in units of 100 μs) |
| Overvoltage Category: | Category I |
| Communication Protocols: | Leimac command (TCP/IP, UDP/IP), GigE Vision (GenICam compatible) |
Mechanical
| Weight: | 210 g |
Environmental
| Operating Temperature: | 0 to 40°C |
| Operating Humidity: | 20 to 85% (non condensing) |
| Storage Temperature: | -20 to +65°C |
| Storage Humidity: | 20 to 85% RH (no condensation) |
| Altitude: | 2000 m or less, indoor use |
| Vibration Resistance: | 19.6 m/s2 10 to 55 Hz 1 hour in X, Y and Z directions |
| Shock Resistance: | 98 m/s2 half sine wave 3 times in X, Y and Z directions |
Miscellaneous
| Conformance: | EMC standard: EN55011 Group 1 Class A, EN61000-6-2; Compliant with RoHS directive |
| Contamination Level: | Level 2 |
Connectors
| I/O Connector: | Phoenix Contact DFMC 1,5/10-ST-3,5-LR |
| Light Connector: | JST SMP-02V-BC, qty 4 |
| Ethernet Connector: | RJ-45 |
Loading...
See Resources section below to download drawings.
Leimac, Ltd. warranties lights against failure for 2 years from date of factory shipment, and against a 50% or greater decrease from the specified intensity for 1 year from date of factory shipment. Warranty shall not apply if failure is due to connecting the light to equipment or a power supply made by a third-party, or other factors not attributable to Leimac. THERE ARE NO WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For further information, please refer to the manufacturer's website.
Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)