This breakout box is compatible with both the Matrox Iris GTX and Matrox AltiZ cameras. It may be snapped onto a DIN rail, or mounted on a flat surface.
> Four internal push-buttons for testing camera inputs
> Configurable pull-up/pull-down resistors
> Route camera outputs to camera inputs for testing
> Seven LEDs indicate I/O status
A "locking" plate is included. If you insert the plate, the cover cannot be opened again. This can be used to prevent tampering after installation.
|Power Voltage:||24 VDC +/- 10%|
|Power Consumption:||2.5 A|
|Inputs:||Qty 4, 28.9 V max, 7 mA each|
|Outputs:||Qty 3, 28.9 V max, 50 mA max. each|
|Dimensions:||107.6 x 89.7 mm (4.24 x 3.53 inches)|
|Operating Temperature:||0 to 50 °C (32 °F to 122 °F)|
|Operating Humidity:||85% RH, non-condensing.|
|Storage Temperature:||0 to 70 °C (32 °F to 158 °F)|
|Storage Humidity:||95% RH, non-condensing|