Image shows a Leimac IDGB-50M2-24-T

LTLC9140

Light Controller, 2 PWM Channels, 46 W

Leimac IDGB-50M2-24-T

2-channel light controller
46 watt supply
24 VDC input voltage
Choice of control interfaces

The Leimac IDGB-50M2-24-T light controller is compatible with most constant voltage lights. It can deliver a total of 46 watts across its 2 output channels.

The IDBG light controllers with 24 VDC input power are available in three channel / power configurations, supporting up to 8 channels with 150 watts of power.

Choose from three external control interfaces:

> Ethernet and 8-bit parallel

> RS-232C and 8-bit parallel

> RS-485 and 0 - 5 VDC analog

This controller has one high-speed input per channel that enables precision strobe control.

(The photo shown above is generally representative of the product family. Please refer to the drawing for dimensions and connectors.)

Loading...

Electrical

Output Channels: 2
Control Interfaces: Analog, Dial, Ethernet TCP/IP, Parallel, RS232, RS485
Control Method: Voltage Control, PWM
Input Voltage: 24 VDC
Output Voltage: 24 VDC
Output Power: 46 W total
PWM Frequency: ~125 kHz (256 levels)
Variable Delay Range: 1 μs intervals between 0 and 9000 μs. (Add to electrical input response time.)
Variable Output "On" Range: Output can be triggered to remain "on" for 0.1 to 999.9 ms, in 0.1 ms intervals
Control Inputs: One per channel, 5 - 24 VDC, optically isolated, configurable for high or low activation

Mechanical

Weight: 700 g

Environmental

Operating Temperature: 0 - 40°C
Operating Humidity: 20 - 70%, non-condensing
Vibration Resistance: 19.6m/s2 10 - 150 Hz; Test direction X, Y, and Z; Test time: 30 min. (each direction)
Impact Resistance: 98m/s2 half-sine; Test direction X, Y, and Z; number of tests: 3 times

Connectors

Light Connectors: JST SMP-03V-BC
I/O Connector 1: Omron XG4A-2631
Ethernet Connector: RJ-45 (Ethernet models only)
RS232 Connector: Hirose HR10G-7R-4S73 (RS232 models only)
RS485 Connector: Hirose HR10G-7R-4S73, qty 2 (RS485 models only)

Standards

Conformance RoHS, China RoHS, CE (EN61010-1, EN55011, EN61000-6-2)

Choose a Control Interface

EP Ethernet and 8-bit Parallel
R2P RS-232C and 8-bit Parallel
R4A RS-485 and Analog 0-5V

Available in US & Canada.

Please sign in to check availability.

Loading...


See Resources section below to download drawings.

Disabled resource link Drawing, Ethernet and Parallel (DXF)
Disabled resource link Drawing, Ethernet and Parallel (PDF)
Disabled resource link Drawing, Ethernet and Parallel (STEP)
Disabled resource link Drawing, RS232C and Parallel (DXF)
Disabled resource link Drawing, RS232C and Parallel (PDF)
Disabled resource link Drawing, RS232C and Parallel (STEP)
Disabled resource link Drawing, RS485 and Analog (DXF)
Disabled resource link Drawing, RS485 and Analog (PDF)
Disabled resource link Drawing, RS485 and Analog (STEP)


Sign In or Register to unlock all links above.

Leimac, Ltd. warranties controllers against failure for 2 years from date of factory shipment. Warranty shall not apply if failure is due to factors not attributable to Leimac. THERE ARE NO WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For further information, please refer to the manufacturer's website.

Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)