LTLC9103
Leimac IDGB-50M2
Light Controller, 2 PWM Channels, 50 W
This item has been discontinued. Please contact us for substitutes.The Leimac IDGB-50M2 light controller is compatible with most constant voltage lights. It can deliver a total of 50 watts across its 2 output channels.
The IDBG light controllers are available in a large number of different configurations. We offer an appropriate controller for each installation, powering up to 8 independent channels with up to 150 watts.
Choose from three external control interfaces:
> Ethernet and 8-bit parallel
> RS-232C and 8-bit parallel
> RS-485 and 0 - 5 VDC analog
This controller has one high-speed input per channel that enables precision strobe control.
(The photo shown above is generally representative of the product family. Please refer to the drawing for dimensions and connectors.)
Loading...
Electrical
| Output Channels: | 2 |
| Control Interfaces: | Analog, Manual, Ethernet TCP/IP, Parallel, RS232, RS485 |
| Control Method: | Voltage Control, PWM |
| Input Voltage: | 100 - 240 VAC, 50/60 Hz |
| Output Voltage: | 12 VDC or 24 VDC, depending on model |
| Output Power Total: | 50 W (all channels combined) |
| Output Power per Channel: | 30 W max. @ 12V; 50 W max. @ 24V |
| PWM Frequency: | ~125 kHz (256 levels) |
| Variable Delay Range: | 1 μs intervals between 0 and 9000 μs. (Add to electrical input response time.) |
| Variable Output "On" Range: | Output can be triggered to remain "on" for 0.1 to 999.9 ms, in 0.1 ms intervals |
| Control Inputs: | One per channel, 5 - 24 VDC, optically isolated, configurable for high or low activation |
Mechanical
| Weight: | 1200 g |
Environmental
| Operating Temperature: | 0 - 40°C |
| Operating Humidity: | 20 - 70%, non-condensing |
| Vibration Resistance: | 19.6m/s2 10 - 150 Hz; Test direction X, Y, and Z; Test time: 30 min. (each direction) |
| Impact Resistance: | 98m/s2 half-sine; Test direction X, Y, and Z; number of tests: 3 times |
Connectors
| Light Connectors: | JST SMP-02V-BC (12 V) or JST SMP-03V-BC (24 V) |
| I/O Connector 1: | Omron XG4A-2631 |
| I/O Connector 2: | Omron XG4A-2031 |
| Power Connector: | IEC 60320 C14 "PC type" receptacle |
| Ethernet Connector: | RJ-45 (Ethernet models only) |
| RS232 Connector: | Hirose HR10G-7R-4S73 (RS232 models only) |
| RS485 Connector: | Hirose HR10G-7R-4S73, qty 2 (RS485 models only) |
Standards
| Conformance | RoHS, China RoHS, PSE, CE (EN61010-1, EN55011, EN61000-6-2) |
Loading...
See Resources section below to download drawings.
Drawing, Ethernet and Parallel (DXF)
Drawing, Ethernet and Parallel (PDF)
Drawing, Ethernet and Parallel (STEP)
Drawing, RS232C and Parallel (DXF)
Drawing, RS232C and Parallel (PDF)
Drawing, RS232C and Parallel (STEP)
Drawing, RS485 and Analog (DXF)
Drawing, RS485 and Analog (PDF)
Drawing, RS485 and Analog (STEP)
Manual (PDF)
Control Interface Manual (PDF)
How to Strobe using Basler GigE Camera
Sign In or Register to unlock all links above.
Leimac, Ltd. warranties controllers against failure for 2 years from date of factory shipment. Warranty shall not apply if failure is due to factors not attributable to Leimac. THERE ARE NO WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For further information, please refer to the manufacturer's website.
Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)