Please sign in to check inventory.
This spot light is a great value. It includes a high-brightness LED lamp and a light controller inside a special thermally conductive aluminum housing.
The light controller offers lots of flexibility. For strobe applications, the LEDs will turn on within 20 microseconds. Enable its burst mode to deliver a pulse of super-bright light. Or disable burst mode for continuous operation, or to use with an external PWM controller. You can control the LED intensity using the built-in potentiometer, or via the 0 – 10 VDC intensity input.
The light has an auto-reset circuit to protect the LED against damaging over-temperature conditions. Three small LEDs indicate power, strobe trigger, and fault conditions.
The housing has an M12 connector for easy installation. A 3 meter cable is included. It has conductors for power, NPN and PNP strobe triggers, and analog intensity control.
Please contact us if you’re interested in a different diffuser material, a longer cable, or a high-flex cable.
Power: | 320 mA max (burst mode) or 80 mA continuous @ 24 VDC |
Strobe: | NPN (GND to enable) or PNP (3 - 30 VDC to enable) |
Window: | Clear |
Window Size: | 38 x 38 mm (1.5" x 1.5") |
Window Options: | Optional diffusers: Clear cover, thin film diffuser, or linear polarizer. |
Optics: | 16 degree FWHM |
Optics Options: | 23 degree, 39 degree, or 44 x 15 degree line |
Type: | Spot |
Wavelength: | 470 nm typical (Blue) |
Cable Length: | 3.0 m (9.8 ft) |
Please contact us for information about any manufacturer's warranty.
Items configured with options marked NC/NR cannot be canceled or returned. Special order items and open cartons cannot be returned unless defective as covered by the manufacturer's warranty. The return of item quantities exceeding that normally stocked by Machine Vision Store will be subject to a restocking fee. All returns must be pre-authorized by Machine Vision Store and shipped with freight pre-paid. Please contact us to request authorization and instructions.