Please sign in to check availability.
This spot light is a great value. It includes a high-brightness LED lamp and a light controller inside a special thermally conductive aluminum housing.
The light controller offers lots of flexibility. For strobe applications, the LEDs will turn on within 20 microseconds. Enable its burst mode to deliver a pulse of super-bright light. Or disable burst mode for continuous operation, or to use with an external PWM controller. You can control the LED intensity using the built-in potentiometer, or via the 0 – 10 VDC intensity input.
The light has an auto-reset circuit to protect the LED against damaging over-temperature conditions. Three small LEDs indicate power, strobe trigger, and fault conditions.
The housing has an M12 connector for easy installation. A 3 meter cable is included. It has conductors for power, NPN and PNP strobe triggers, and analog intensity control.
Please contact us if you’re interested in a different diffuser material, a longer cable, or a high-flex cable.
|Power:||320 mA max (burst mode) or 80 mA continuous @ 24 VDC|
|Strobe:||NPN (GND to enable) or PNP (3 - 30 VDC to enable)|
|Window Size:||38 x 38 mm (1.5" x 1.5")|
|Window Options:||Optional diffusers: Clear cover, thin film diffuser, or linear polarizer.|
|Optics:||16 degree FWHM|
|Optics Options:||23 degree, 39 degree, or 44 x 15 degree line|
|Wavelength:||395 nm typical (Ultraviolet)|
|Cable Length:||3.0 m (9.8 ft)|