The Matrox Concord PoE network interface card offers four Ethernet ports. Features include:
> PoE (Power-over-Ethernet)
> Optional Trigger-over-Ethernet for reduced capture latency
> Real-time hardware-assisted I/O option (6 in, 2 out)
The Trigger-over-Ethernet option provides additional functionality. A trigger command can be sent to a camera upon the rising or falling edge of an internal or external signal. The option includes six inputs and two outputs, with support for quadrature encoders.
The cards include a GigE run-time license for Matrox MIL and MIL LITE software development kits.
ACQUISITION SOFTWARE
Matrox Imaging Library (MIL) is a comprehensive software development kit (SDK) for machine vision. It powers capture, manipulation and analysis of both 2D and 3D images. MIL LITE is a software development kit that enables image capture, display, annotation, and archiving.
Design Assistant (DA) is a flow-chart based integrated development environment. Capture from any GigE Vision or USB3 Vision compliant camera. Manipulate and analyze images to make pass/fail decisions, then exchange data with a PLC or robot.
Please see the Accessories tab for links to acquisition software.
Electrical
| Bus Interface | PCIe 2.1 x4 |
| Controllers | Intel Ethernet Controller I210-IT |
| Speeds | 10/100/1,000 Mbps |
| Power Output | PoE 15.4W maximum per port |
| General Purpose I/Os | Six isolated inputs, two isolated outputs |
| Discrete I/O | 6 in, 2 out (with ToE option only) |
| Timers | 16 (with ToE option only) |
| Quadrature Decoders | 2 (with ToE option only) |
Mechanical
| Dimensions | 167.65 x 111.15 x 187.mm |
Environmental
| Operating Temperature | 0-60° C |
This product is warranted by the manufacturer to be free from defects in materials and workmanship under normal use for a period of one (1) year from the date of original factory shipment. For further information, please refer to the manufacturer's website.
Due to the manufacturer's policies, orders cannot be cancelled once they have been confirmed by the factory. Returns will not be accepted unless the item is defective under warranty. Items configured with options marked NC/NR cannot be cancelled, nor returned.
All returns must be pre-authorized by Machine Vision Store and shipped with freight pre-paid. Please contact us to request authorization and instructions. The item's serial number and associated sales order number will be needed.