CECN120
MVS
CXP Cable, HD-BNC to DIN 1.0/2.3
This cable is ideal for connecting CoaXPress cameras to an interface card having a different connector. For example, SVS-Vistek CXP-6 cameras have a DIN 1.0/2.3 connector; This cable enables connecting them to the Matrox Rapixo card that uses HD-BNC connectors.
The DIN 1.0/2.3 connector is a push/pull type. With the HD-BNC connector, you twist the sleeve to connect or disconnect it. Note that HD-BNC connectors are fully compatible with micro-BNC connectors, and can be used interchangeably.
This cable is 100% sweep tested and ready for 12 Gbps (CXP-12) data transfer. The RG59 cable is thinner and more flexible than heavier RG6 cable. Please note the reduced bandwidth capability of longer cable lengths, as per the CoaXPress standard.
Electrical
| Cable Return Loss: | 15 dB at 4,500 - 12,000 MHz |
| Cable Attenuation: | 41.2 db/100 ft at 12,000 MHz |
Mechanical
| Cable: | Belden 4855R (mini RG59) |
| Conductor: | 23 AWG, solid, bare silvered copper |
| Insulation: | Gas-injected FHDPE |
| Outer Shield: | Duobond II tape with 100% coverage; Tinned copper braid with 95% coverage |
| Jacket: | PVC |
Connectors
| Connector 1: | HD-BNC male (Micro BNC) |
| Connector 2: | DIN 1.0/2.3 male |
Please contact us for information about any manufacturer's warranty.
Orders for this item cannot be canceled or returned. (Sorry, but this is the manufacturer's policy.)