The Leimac IPSA-7M4-C2 light controller is powered over Ethernet (PoE) for simplified installation. It complies with the PoE IEEE802.3af standard. You can connect it to the same network as your PoE cameras, eliminating unnecessary cable runs and reducing installation costs.
This overdrive controller can strobe LED lights at up to 36 volts for much higher illumination intensity. The four output channels are clamped at a combined total of 7.8 watts. Although higher-current lights can be connected, they won't operate at full intensity.
Adjustable light parameters include:
> Lights enabled (on/off)
> Trigger mode (internal/external)
> Maximum voltage (12 - 36 volts, depending on the light)
> Applied voltage (12 to the maximum voltage, with 1024 levels)
> Strobe duration (0 - 999 μs, in 1 μs intervals)
> Strobe delay (0 - 5000 μs, in 1 μs intervals)
Eight configuration sets can be programmed for later recall.
This controller has standard TCP/IP and UDP/IP interfaces. Most devices that support either of these protocols can adjust the light settings. A sample Windows application is available.
The trigger cable is included. On two-channel models, the light cables connect directly to this controller. On the four-channel models, a mini-DIN output cable is included. A LAN cable, a PoE injector, and a bracket for mounting on a 35 mm DIN rail are sold separately.
|Control Interfaces:||Ethernet TCP/IP|
|Control Method:||Voltage Control, Overdrive|
|Input Power:||320 mA max. at 48 VDC via PoE (IEEE802.3af)|
|Output Voltage:||12 - 36 VDC|
|Output Power:||Total output current clamped at 7.8 W|
|Trigger Response:||Approx. 1 μS|
|Size:||71.0 x 35.5. x 50.4 mm|
|Weight:||140g or less|
|Operating Temperature:||0 to 40 °C|
|Operating Humidity:||20 to 70% RH, non-condensing|
|Conformance||RoHS, CE EN55011 Group1 ClassA, EN61000-6-2, IEEE802.3af|
See Resources section below to download drawings.
Leimac, Ltd. warranties controllers against failure for 2 years from date of factory shipment. Warranty shall not apply if failure is due to factors not attributable to Leimac. THERE ARE NO WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For further information, please refer to the manufacturer's website.
Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)