CESN150
Spectrum Illumination
Monster Light Cable, Regular Duty
This cable is used to connect Spectrum Illumination Monster lights to their light controller. It has a 5-pin M12 connector on the light end, and flying leads on the other.
Note that a cable is included with Spectrum Illumination lights. Order this item for replacement, or if a different cable length is needed later.
This cable should not be used with the longest linear lights (69" and longer), nor with the high-output strobe-only lights.
Electrical
| Rated Current: | 4 A |
| Rated Voltage: | 250 V |
Mechanical
| Length: | 1 mm |
| Jacket: | PVC |
| Color: | Gray |
| Coupling Nut: | Brass/Nickel |
| Conductors: | 4 x 22 AWG, 1 x 20 AWG |
Configure to choose your cable length. This cable is not rated for frequent flexing or twisting, as in robotic installations.
Please contact us for information about any manufacturer's warranty.
Items configured with options marked NC/NR cannot be canceled or returned. Special order items and open cartons cannot be returned unless defective as covered by the manufacturer's warranty. The return of item quantities exceeding that normally stocked by Machine Vision Store will be subject to a restocking fee. All returns must be pre-authorized by Machine Vision Store and shipped with freight pre-paid. Please contact us to request authorization and instructions.