LSOG670
Opto Engineering TCSE5M065-J
High-Res Telecentric Lens 0.366X for 4/3"mm Sensor
Not available for purchase outside of North America.Opto-Engineering TCSE5M065-J, Telecentric Lens, 0.366X for 1.3" sensor, and M42x1 mount.
The Opto Engineering TCSE high-resolution telecentric lenses are designed for various large sensor formats. Assorted models support 4/3”, APS-C, APS-H and/or full frame sensors. TCSE lenses ensure exceptional resolution and low distortion. The long working distance allows for extra space.
Most TCSE lenses feature a variable aperture that provides great application versatility. In addition, some models are optimized for use in the near-infrared (NIR) wavelength range, making them ideal for semiconductor inspection.
Mechanical
| Lens Mount: | M42 x 1 |
| Length: | 192.0 mm |
| Filter Thread: | None (slip-on filters available) |
| Weight: | 1091 g |
| Flange Back Distance: | 12 mm |
Optical
| Lens Type: | Telecentric |
| Magnification: | 0.366 |
| Distortion: | < 0.08 % |
| Depth of Field: | 3.10 mm |
| Telecentricity: | < 0.06 degrees |
| Working Distance: | 189.0 mm |
| F#: | 8.0 - 32.0 |
| Image Circle: | 23.90 mm (1.3") |
| World Resolution: | 14 μm |
| f-number Note: | The f-number shown is the “working” or “real” f-number of the lens when used as a macro. |
| Working Distance Note: | The working distance should be kept within +/- 3% of the nominal value shown below for maximum resolution and minimum distortion. |
For the sharpest image, keep the object within half the specified depth of field. The length is measured from the lens's front to its flange.
Learn about lenses in our Lens Tech Center.
Contact us for compatible filters.
Opto Engineering USA offers a one year warranty from the day the part leaves the factory.
For further information, please refer to the manufacturer's website.
If you're not confident this lens will meet your needs, please ask us to confirm your selection prior to purchase. Some lens models may be available for a 20 day evaluation. Returns subject to factory approval. If approved, a restocking charge will apply.
