Image shows a Basler Ace acA1300-60gc

CABR204

Basler Ace acA1300-60gc

1280 x 1024 Color CMOS GigE Camera

Price: $559.00 each

Not available for purchase outside of North America.

Please sign in to check inventory.

1280 x 1024 color images at 60 frames per second
Compact 42 x 29 x 29 mm housing
Power over Ethernet (PoE) support
Available with C or CS lens mount

The ace series of cameras offer fantastic value. The acA1300-60gc is built on an e2v CMOS sensor to deliver 60 frames per second at full 1280 x 1024 resolution. The combination of resolution, frame rate, global or rolling shutter, overall performance, and price is without equal.

Please contact us for ordering instructions if you require the CS-mount version.

Because the Basler ace GigE camera uses the same 29 x 29 mm footprint that has been standard on analog cameras for many years, replacement of analog cameras is easy. Some existing Camera Link cameras and IEEE 1394a or 1394b cameras with this same footprint can also be easily replaced.

Using a Power over Ethernet (“PoE”) configuration, a single cable may be used to apply camera power and to transfer data between this camera and a PC, keeping cable runs to a minimum. An auxiliary connector is provided for terminating the input and output signal – there is one of each. The input may be configured to trigger image acquisition, reset the frame counter, or reset the software trigger count. The output may be configured to indicate acquisition trigger wait, exposure active, flash window, or timer active. Or the output may be controlled via a PC. The auxiliary connector may be used to power the camera if PoE is not available.

The Basler ace provides a full set of features to address a wide range of applications. Pixel data can be output in 8 or 12 bit depth. You may adjust the camera’s black level, gain, area of interest, input debounce, and trigger delay. It features automatic exposure control, pixel binning, horizontal image mirroring, event reporting, sending of test images, and a programmable lookup table. There are also “chunk” features that include a frame counter, time stamp, trigger input counter, and CRC checksum calculator. Note that not all features may be available when using third-party software.

Because this camera is GigE Vision and GenICam compliant, there are many third party software applications and API’s that are compatible. Basler offers their royalty-free Pylon SDK for 32 and 64 bit Windows and Linux platforms.

Mechanical

Lens Mount: C-Mount

Miscellaneous

Sensor Resolution: 1,280 (h) x 1,024 (v) pixels
Sensor Size: 8.69 mm
Sensor Model: e2v EV76C560ACT-EQV
Chroma: Color Bayer
Shutter Type: Global Or Rolling
Frame Rate (full resolution): 60.0 frames/second
Dark Noise: 24.6 e-
Saturation Capacity: 9.4 ke-
Dynamic Range: 51.7 dB
Signal-to-Noise Ratio: 39.7 dB
Test Method: EMVA 1288
Data Interface: Ethernet Gig-E Vision
Data Rate: Gigabit Ethernet

CS-mount version (p/n 106580) available on request.


Learn about camera specs in our Camera Tech Center.

Loading...


See Resources section below to download drawings.

Disabled resource link Users Manual (PDF)
Resource link Pylon Software Resource link Ace Datasheet (PDF) Resource link GigE Tech Center
Disabled resource link How to trigger a Leimac IDGB strobe controller
Disabled resource link How to trigger a Leimac ILP strobe controller
Disabled resource link Camera Quick Tester Utility
Disabled resource link Drawings
Link to Field of View calculator Select a Lens for Basler Ace acA1300-60gc Link to Field of View calculator Learn from our Camera Tech Center


Sign In or Register to unlock all links above.

This camera is warranted by the manufacturer to be free from defects in materials and workmanship under normal use for a period of three (3) years from the date of original factory manufacture.

Small quantities of cameras normally stocked by Machine Vision Store may be returned within 30 days, subject to a 20% restocking charge, if original package is unopened and in new condition. Larger quantities are subject to Basler's 40% restocking charge. Open packages may not be returned.

All returns must be pre-authorized by Machine Vision Store and shipped with freight pre-paid. Please contact us to request authorization and instructions. The item's serial number and associated sales order number will be needed.