Image shows a Leimac IDGB-30M8

LTLC9102

Leimac IDGB-30M8

Light Controller, 8 PWM Channels, 30 W

This item has been discontinued. Please contact us for substitutes.
8-channel light controller
30 watt supply
100 - 240 VAC input voltage
Choice of control interfaces

The Leimac IDGB-30M8 light controller is compatible with most constant voltage lights. It can deliver a total of 30 watts across its 8 output channels.

The IDBG light controllers are available in a large number of different configurations. We offer an appropriate controller for each installation, powering up to 8 independent channels with up to 150 watts.

Choose from three external control interfaces:

> Ethernet and 8-bit parallel

> RS-232C and 8-bit parallel

> RS-485 and 0 - 5 VDC analog

This controller has one high-speed input per channel that enables precision strobe control.

(The photo shown above is generally representative of the product family. Please refer to the drawing for dimensions and connectors.)

Loading...

Electrical

Output Channels: 8
Control Interfaces: Analog, Manual, Ethernet TCP/IP, Parallel, RS232, RS485
Control Method: Voltage Control, PWM
Input Voltage: 100 - 240 VAC, 50/60 Hz
Output Voltage: 12 VDC or 24 VDC, depending on model
Output Power: 30 W Total
PWM Frequency: ~125 kHz (256 levels)
Variable Delay Range: 1 μs intervals between 0 and 9000 μs. (Add to electrical input response time.)
Variable Output "On" Range: Output can be triggered to remain "on" for 0.1 to 999.9 ms, in 0.1 ms intervals
Control Inputs: One per channel, 5 - 24 VDC, optically isolated, configurable for high or low activation

Mechanical

Weight: 1000 g

Environmental

Operating Temperature: 0 - 40°C
Operating Humidity: 20 - 70%, non-condensing
Vibration Resistance: 19.6m/s2 10 - 150 Hz; Test direction X, Y, and Z; Test time: 30 min. (each direction)
Impact Resistance: 98m/s2 half-sine; Test direction X, Y, and Z; number of tests: 3 times

Connectors

Light Connectors: JST SMP-02V-BC (12 V) or JST SMP-03V-BC (24 V)
I/O Connector 1: Omron XG4A-2631
I/O Connector 2: Omron XG4A-2031
Power Connector: IEC 60320 C14 "PC type" receptacle
Ethernet Connector: RJ-45 (Ethernet models only)
RS232 Connector: Hirose HR10G-7R-4S73 (RS232 models only)
RS485 Connector: Hirose HR10G-7R-4S73, qty 2 (RS485 models only)

Standards

Conformance RoHS, China RoHS, PSE, CE (EN61010-1, EN55011, EN61000-6-2)

Choose an Output Voltage

12V 12 VDC
24V 24 VDC

Choose a Control Interface

EP Ethernet and 8-bit Parallel
R2P RS-232C and 8-bit Parallel
R4A RS-485 and Analog 0-5V

Not available for purchase outside of US & Canada.

Please sign in to check inventory.

Loading...


See Resources section below to download drawings.

Disabled resource link Drawing, Ethernet and Parallel (DXF)
Disabled resource link Drawing, Ethernet and Parallel (PDF)
Disabled resource link Drawing, Ethernet and Parallel (STEP)
Disabled resource link Drawing, RS232C and Parallel (DXF)
Disabled resource link Drawing, RS232C and Parallel (PDF)
Disabled resource link Drawing, RS232C and Parallel (STEP)
Disabled resource link Drawing, RS485 and Analog (DXF)
Disabled resource link Drawing, RS485 and Analog (PDF)
Disabled resource link Drawing, RS485 and Analog (STEP)
Disabled resource link Manual (PDF)
Disabled resource link Control Interface Manual (PDF)
Disabled resource link How to Strobe using Basler GigE Camera


Sign In or Register to unlock all links above.

Leimac, Ltd. warranties controllers against failure for 2 years from date of factory shipment. Warranty shall not apply if failure is due to factors not attributable to Leimac. THERE ARE NO WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. For further information, please refer to the manufacturer's website.

Orders for this item cannot be cancelled, nor returned. (Sorry, but this is the manufacturer's policy.)