This linear light is a great value. It includes 5 high-brightness LED lamps and a light controller inside a special thermally conductive aluminum housing.
The light controller offers lots of flexibility. For strobe applications, the LEDs will turn on within 20 microseconds. Enable its burst mode to deliver a pulse of super-bright light. Or disable burst mode for continuous operation, or to use with an external PWM controller. You can control the LED intensity using the built-in potentiometer, or via the 0 – 10 VDC intensity input.
The light has an auto-reset circuit to protect the LEDs against damaging over-temperature conditions. Three small LEDs indicate power, strobe trigger, and fault conditions.
The housing has an M12 connector for easy installation. A 3 meter cable is included. It has conductors for power, NPN and PNP strobe triggers, and analog intensity control.
Please contact us if you’re interested in a different diffuser material, a longer cable, or a high-flex cable.
|Wavelength:||470 nm (Blue)|
|Window:||Clear||Optional diffusers: White, white semi-opaque, shower glass, thin film, or linear polarizer.|
|Window Width:||150 mm (5.9")|
|Window Height:||49 mm (1.9")|
|Optics:||15 degree FWHM||24 degree, 43 degree, or 44 x 15 degree line|
|Power:||1.5 A max (burst mode) @ 24 VDC|
|Strobe:||NPN (GND to enable) or PNP (3 - 30 VDC to enable)|
|Cable Length:||3.0 m (9.8 ft)|
|Eurofast M12 5-pin Plug (Male)||Qty 1|