Image shows a SVS-Vistek hr51MXGE

CASK734

SVS-Vistek hr51MXGE

8424 x 6032 Monochrome 10-GigE Camera

Price: $8,869.00 each

Not available for purchase outside of North America.

Please sign in to check inventory.

51 MP at 23.7 frames per second
10-GigE interface
Gpixel GMAX4651 sensor with 4.6 µm pixels
Integrated LED strobe controller
Power-over-Ethernet option

This 51 megapixel SVS-Vistek monochrome camera is built on the Gpixel GMAX4651 sensor. This high-performance sensor has 4.6 µm pixels and a global shutter. The 10-GigE interface delivers 23.7 frames-second-second.

Ask us about the lower-cost "Grade 2" sensor option.

10 GigE INTERFACE

The 10 GigE Vision interface delivers up to 1.1 GB/s of image data, over long cable runs. This camera is GigE Vision and GenIcam standard compliant, with a GenTL driver. Burst mode is enabled by temporary on-camera image buffering.

IMAGING FEATURES

This 10 GigE camera's features include: ROI, LUT, binning, offset, auto-exposure, defect pixel correction and, on color cameras, manual and automatic white balance.

FLEXIBLE LENS MOUNT

This camera has a M58 lens mount, enabling you to pair it with the optimal lens for your project. We offer adapters for M42, F, and EF-mount lenses. And be sure to check our selection of quality lenses for large format sensors.

FLEXIBLE I/O

This camera's flexible electrical interface includes 3 inputs and 4 outputs, plus support for RS232 communication with a lens or light controller. Features include programmable IO logic, a sequencer, timer, SafeTrigger and an integrated 4-channel LED strobe controller. The light controllers can be adjusted via the GenICam parameter tree. GenICam compliant software, or the SDK API, can therefore adjust the light settings for a seamlessly integrated solution.

Electrical

Inputs: 3 total, 24 VDC, one optically isolated
Outputs: 4 total, 24 VDC, with support for PWM (up to 3 amps for 40 ms, or 0.3 amps continuously)
Input Voltage: 10 - 25 VDC
PoE+: Power over Ethernet Plus is available as an option
RS-232 Interface: Yes (RXD, TXD)

Mechanical

Lens Mount: M58x0.75
Camera Flange-back Distance: 11.48 mm

Environmental

Ambient Temperature: -10 to 45 °C
Ambient Humidity: 10 to 90% (non-condensing)
Ingress Protection: IP30

Miscellaneous

Sensor Resolution: 8,424 (h) x 6,032 (v) pixels
Sensor Size: 47.63 mm
Sensor Model: Gpixel GMAX4651 - M
Chroma: Monochrome
Shutter Type: Global
Frame Rate (full resolution): 23.7 frames/second
Dynamic Range: 65.0 dB
Signal-to-Noise Ratio: 42.6 dB
Data Interface: Ethernet Gig-E Vision
Data Rate: 10 Gigabit Ethernet
Pixel Format: bayer8, bayer12, bayer16 / 16 bit

Connectors

I/O Connector: Hirose 12-pin male (HR10A-10R-12P)
Data Connector: RJ45 port (GigE Vision TYPE090)

Learn about camera specs in our Camera Tech Center.

The manufacturer will repair or replace defective cameras within two years of factory shipment. For further information, please refer to the manufacturer's website.

We're interested in making sure you're happy with your purchase. Some models are available for a 30-day evaluation. The return of cameras is subject to factory discretion. Any cameras approved for return must be in new condition and in their original packaging. Returns will be subject to a restocking fee.

All returns must be pre-authorized by Machine Vision Store and shipped with freight pre-paid. Please contact us to request authorization and instructions. The item's serial number and associated sales order number will be needed.