Image shows a Basler Ace acA2500-14gc

CABR206

Basler Ace acA2500-14gc

2592 x 1944 Color CMOS GigE Camera

Price: $569.00 each

Not available for purchase outside of North America.

Please sign in to check inventory.

5 megapixels at 14 frames per second
Up to 100 meter cable lengths
Compact 42 x 29 x 29 mm housing
Power over Ethernet (PoE) support

We’re offering this Basler GigE 5 megapixel color camera at an amazing price. Built on an Aptina CMOS sensor, the acA2500-14gc delivers a pixel resolution of 2592 x 1944 at 14 frames per second.

This camera has a rolling shutter. If the item you’re imaging is moving relative to the camera, you’ll want to use a strobe light for “stop-action” imaging. The camera can output a flash window signal to control the strobe.

Because the Basler ace GigE camera uses the same 29 x 29 mm footprint that has been standard on analog cameras for many years, replacement of analog cameras is easy. Some existing Camera Link cameras and IEEE 1394a or 1394b cameras with this same footprint can also be easily replaced.

Using a Power over Ethernet (“PoE”) configuration, a single cable may be used to apply camera power and to transfer data between this camera and a PC, keeping cable runs to a minimum. An auxiliary connector is provided for terminating the input and output signal – there is one of each. The input may be configured to trigger image acquisition, reset the frame counter, or reset the software trigger count. The output may be configured to indicate acquisition trigger wait, exposure active, flash window, or timer active. Or the output may be controlled via a PC. The auxiliary connector may be used to power the camera if PoE is not available.

The Basler ace provides a full set of features to address a wide range of applications. Pixel data can be output in 8 or 12 bit depth. You may adjust the camera’s black level, gain, area of interest, input debounce, and trigger delay. It features automatic exposure control, pixel binning, horizontal image mirroring, event reporting, sending of test images, and a programmable lookup table. There are also “chunk” features that include a frame counter, time stamp, trigger input counter, and CRC checksum calculator. Note that not all features may be available when using third-party software.

Because this camera is GigE Vision and GenICam compliant, there are many third party software applications and API’s that are compatible. Basler offers their royalty-free Pylon SDK for 32 and 64 bit Windows and Linux platforms.

Mechanical

Lens Mount: C-Mount

Miscellaneous

Sensor Resolution: 2,592 (h) x 1,944 (v) pixels
Sensor Size: 7.13 mm
Sensor Model: Aptina MT9P031
Chroma: Color Bayer
Shutter Type: Rolling
Frame Rate (full resolution): 14.0 frames/second
Dark Noise: 6.7 e-
Saturation Capacity: 6.8 ke-
Dynamic Range: 60.0 dB
Signal-to-Noise Ratio: 38.3 dB
Test Method: EMVA 1288
Data Interface: Ethernet Gig-E Vision
Data Rate: Gigabit Ethernet

This camera has a rolling shutter.


Learn about camera specs in our Camera Tech Center.

Loading...


See Resources section below to download drawings.

Resource link Pylon Software
Disabled resource link Users Manual (PDF)
Resource link Ace Datasheet (PDF) Resource link GigE Tech Center Resource link Compare to 5 MP Aptina Killer
Disabled resource link How to trigger a Leimac IDGB strobe controller
Disabled resource link How to trigger a Leimac ILP strobe controller
Disabled resource link Camera Quick Tester Utility
Disabled resource link Drawings
Link to Field of View calculator Select a Lens for Basler Ace acA2500-14gc Link to Field of View calculator Learn from our Camera Tech Center


Sign In or Register to unlock all links above.

This camera is warranted by the manufacturer to be free from defects in materials and workmanship under normal use for a period of three (3) years from the date of original factory manufacture.

Small quantities of cameras normally stocked by Machine Vision Store may be returned within 30 days, subject to a 20% restocking charge, if original package is unopened and in new condition. Larger quantities are subject to Basler's 40% restocking charge. Open packages may not be returned.

All returns must be pre-authorized by Machine Vision Store and shipped with freight pre-paid. Please contact us to request authorization and instructions. The item's serial number and associated sales order number will be needed.