LTSN312

LTSN312

60 x 150 mm Green HB LED Light

Spectrum Illumination E Series

$ 654.00 each

Please sign in or register to check availability.

Two rows of 150 mm green light
Internal controller with burst
Includes cable with quick disconnect
3 year limited warranty

This linear light is a great value. It includes 10 high-brightness LED lamps and a light controller inside a special thermally conductive aluminum housing. The LEDs are arranged in two rows of five lamps.

The light controller offers lots of flexibility. For strobe applications, the LEDs will turn on within 20 microseconds. Enable its burst mode to deliver a pulse of super-bright light. Or disable burst mode for continuous operation, or to use with an external PWM controller. You can control the LED intensity using the built-in potentiometer, or via the 0 – 10 VDC intensity input.

The light has an auto-reset circuit to protect the LEDs against damaging over-temperature conditions. Three small LEDs indicate power, strobe trigger, and fault conditions.

The housing has an M12 connector for easy installation. A 3 meter cable is included. It has conductors for power, NPN and PNP strobe triggers, and analog intensity control.

Please contact us if you’re interested in a different diffuser material, a longer cable, or a high-flex cable.

Details

Type: Linear Array
Wavelength: 530 nm (Green)
Window: Clear Optional diffusers: White, white semi-opaque, shower glass, thin film, or linear polarizer.
Window Width: 150 mm (5.9")
Window Height: 60 mm (2.4")
Optics: 16 degree FWHM 23 degree, 39 degree, or 44 x 15 degree line
Power: 3.0 A max (burst mode) @ 24 VDC
Strobe: NPN (GND to enable) or PNP (3 - 30 VDC to enable)
Cable Length: 3.0 m (9.8 ft)

Connectors

Eurofast M12 5-pin Plug (Male) Qty 1